Installer & Auditor Training

May 7 – 9, 2024

Deadline to Register is April 19, 2024

The Air Barrier Association of America (ABAA) will prepare you for the challenges and rewards in the air barrier industry with our training courses. ABAA sets the standard in quality and assurance and provides those in the construction industry with a sense of professionalism and pride.

Training is an investment in the future and a tool for success. ABAA’s elite training program provides you with an edge in an increasingly competitive marketplace. Whether you are looking to upgrade your skills, or searching for a new career, ABAA’s courses are designed to meet your needs.

ABAA’s training and licensing programs provide a means to ensure applicators possess the necessary skills and knowledge to produce quality air barrier installations. Certifications sets you apart from the competition and identifies you as a professional.

Training Courses Offered

The Spray Polyurethane Foam installer training course consists of both theory and practical instruction.

The classroom portion of training emphasizes understanding the need for and function of an air barrier assembly, the ability to select and install the correct material in SPF application, the ability to confirm proper installation through on-site testing and the documentation required throughout the air barrier installation process. The classroom is divided into three main modules.

The first, principles and theory provides an introduction to air barriers, building science, codes and standards as well as installer ethics and responsibilities. The second module focuses on procedure, teaching participants about testing and audits and proper documentation and reporting. The final module of the classroom section is an overview of building enclosure construction. Participants will learn about material selection, application technology, substrate conditions and the continuity/compatibility of components.

The practical portion of the training module is carried out on a job site, or on a mock-up where an authorized ABAA representative will instruct the installer and observe the application of the air barrier assembly.

Course Length: 3 Days

PREREQUISITES FOR CERTIFICATION

  • Minimum of 3,000 Hours of experience in air barrier applications or related fields
    • NOTE: a minimum of at least 1,500 hours directly in SPF experience is required
    • Completion the American Chemistry Council (ACC)’s Center for the Polyurethanes Industry (CPI)’s Spray Polyurethane Foam Chemical Health and Safety Training
  • Average passing grade of 80% on installer certification exam
  • Completion of all required documentation
  • Payment in full of all applicable fees

Cost

SPF Training (Includes Exam and Registration)
Member Non-member
$1,495.00 $1,995.00

SPF Training (Excludes Exam and Registration)
Member Non-member
$995.00 $1,495.00

The Self Adhered and Fluid Applied installer training course consists of both theory and practical instruction.

The classroom portion of training emphasizes understanding the need for and function of an air barrier assembly, the ability to select and install the correct material in SA and FL applications, the ability to confirm proper installation through on-sit testing and the documentation required throughout the air barrier installation process. The classroom is divided into three main modules. The first, principles and theory, provides an introduction to air barriers, building science, codes and standards as well as installer ethics and responsibilities. The second module focuses on procedure, teaching participants about testing and audits and proper documentation and reporting. The final module of the classroom section is an overview of building enclosure construction. Participants will learn about material selection, application technology, substrate conditions and the continuity/compatibility of components.

The practical portion of the training module is carried out on a job site, or on a mock-up where an authorized ABAA representative will instruct the installer and observe the application of the air barrier assembly.

Course Length: 3 Days

PREREQUISITES FOR CERTIFICATION

  • Minimum of 3000 hours of experience in air barrier applications or related fields
  • Average passing grade of 80% on installer certification exam
  • Completion of all required documentation
  • Payment in full of all applicable fees

Cost

SA/FL Training (Includes Exam and Registration)
Member Non-member
$1,495.00 $1,995.00

SA/FL Training (Excludes Exam and Registration)
Member Non-member
$995.00 $1,495.00

The Field Audit training course consists of both theory and practical instruction.

The classroom portion of training emphasizes understanding the need for and function of an air barrier assembly, the ability to inspect installation and review materials for compliance with specifications, ABAA requirements, and manufacturer requirements, the ability to confirm proper installation through on-site testing and the documentation required throughout the air barrier installation process.

The classroom is divided into three main modules. The first, principles and theory, provides an introduction to air barriers, building science, codes and standards as well as installer ethics and responsibilities. The second module focuses on procedure, teaching participants about testing and audits and proper documentation and reporting. The final module of the classroom section is an overview of building enclosure construction. Participants will learn about material selection, application technology, substrate conditions and the continuity/compatibility of components.

The practical portion of the training module is carried out on a job site, or on a mock-up where an authorized ABAA representative will instruct the candidates on audit process for air barrier assemblies.

Course Length: 3 Days

Description

The role of the Field Auditor is to perform quality assurance audits of air barrier assemblies on new commercial and institutional construction projects during installation. Complete audit reports, document audits with photos, and address specific areas which have noted deficiencies and require corrective action(s).

Conflict of Interest/Exclusions

The ABAA requires that all licensed auditors be impartial 3rd party contract employees. To that end, candidates employed by ABAA contractors, ABAA manufacturers or any General Contracting company are ineligible for Auditor licensing.

PREREQUISITES

– A minimum of three years of related experience (construction/inspection/quality assurance) or any equivalent combination of training and experience with working knowledge in the areas of commercial waterproofing, roofing or building envelope experience.
– Ability to review commercial plans and specifications.
– Firm experience and knowledge of Microsoft and iOS software and other electronic reporting software.
– Completion of the ABAA Auditor 2 day training session to educate auditors on ABAA standards, requirements, materials and audit process.
– Successfully pass the qualifying certification exam and completion of the licensing process.
– Excellent organizational and interpersonal skills.

Please submit CV or résumé to abaa@airbarrier.org for review (please write “Attention Quality Assurance Department”) in the subject line.

Note: ABAA advises candidates that ABAA cannot guarantee any minimum amount of work an auditor will receive and, as such, all potential candidates should view this work as a supplemental source of income.

Cost

Auditor (Includes Exam and Registration)
Member Non-member
$1,495.00 $1,795.00

Auditor (Excludes Exam and Registration)
Member Non-member
$995.00 $1,295.00

Important Information

– ABAA reserves the right to cancel with a minimum 5 days’ notice, based on lack of registrants.
– Students who cancel their registration with less than 5 business days’ notice will not receive a refund.
– We advise all students to hold off on making any travel arrangements until the class has been confirmed as proceeding.
– Attendees are responsible for travel and accommodation costs.
– Class sizes are limited. Complete registration forms are processed in the order in which they are received.
– Missing information on submitted forms may result in not being able to attend the course.

Please Note:

If you are attending for informational purposes only (i.e. not looking for certification), there is no need to send in certification application or pay for the certification fee.

– 1 Registration per person.
– Payment must be received prior to the start of the course.